Weave bracelets of gum on the machine

Olga Nagornyuk
09.07.2015

Weave bracelets of gum on the machine

Beginners, weaving bracelets with the help of fingers, pencils, forks or slingshots, eventually come to the conclusion that real masterpieces can only be created using the Rainbow Loom machine. It not only facilitates the work of the master, but also significantly expands its capabilities, allowing you to create jewelry of amazing beauty.

 

We have already talked about the methods of weaving on fingers, forks and slingshot, it is time to get acquainted with the method of making jewelry on the machine. We have selected for you the 4 most beautiful bracelets that can beautify both the hand of a teenage girl and the wrist of a young woman.

How to weave on the machine bracelet "Star"

In the process of making a stylish and elegant bracelet made from “Asterisk” rubber bands, we will use a machine with three rows of columns arranged in a checkerboard pattern and a hook.

1. We place the machine by cutting the columns from oneself and put the elastic on the extreme pegs of the central and left rows.

2Next, with rubber bands of the same color (we will consider it the main one) we successively connect all the pegs on the left, except the last one.

3. We do the same with the right row, connecting the pegs with rubber bands in pairs, starting from the middle column. In fact, you get a mirror image of the left edge, "dressed" in the gum of the same color.

Note: the far extreme columns of the left and right rows remain unused.

4. After the machine is framed in rubber, we proceed directly to creating rays of stars. In order to make things easier for you, number the pegs in the center in your mind. Every even will be the center of the future snowflake. These columns should be connected with rubber bands with the nearest adjacent pegs, starting from the second column of the right row.

It is important that the connection is clockwise, as indicated in the figure.

5. In the same sequence we connect the fourth central column with its nearest "neighbors", forming the second asterisk.

6. Now, knowing the procedure, it is easy to do the procedure of creating a star pattern to the end of the machine. To make the ornament colorful, use rubber bands of different colors.

7We take the gum of the main color, fold it in half and put on the resulting double collar on the last column of the middle row.

Repeat the same action with all the "middle" stars. The basis of the bracelet is ready.

8. Turn the machine around so that the star made last is closer to us. At the extreme column of the middle row (indicated in the photo under No. 1), with the help of a hook, we hook up the gum, which is one of the rays of the star, and throw it onto the column-core.

9. From the central peg, which is the center of the asterisk, we remove the colored rubber bands one by one, throwing them on the columns — the ends of the star rays. We start from the rightmost column and move counterclockwise.

10. Steps 8 and 9 are done with all the stars to the end of the machine.

11. We return to the perimeter. Gum the main color, connecting the extreme columns of the middle and left rows, hook hook and throw to the nearest to you the left peg.

Then we perform the same actions with elastic bands connecting columns 1 and 2, 2 and 3, 3 and 4 and so on until the end of the machine.

12. Returning to the beginning and doing the same manipulations, only with the pegs located in the right lane.We begin to drop loops from the nearest central column and again we reach the end of the machine.

You should get this picture:

13. We proceed to the final stage - remove the bracelet from the machine.

For convenience, we again deploy the machine, placing slices of pegs away from you. We pass the hook through the loops of the outermost column of the central row, take the gum of the main color and, hooking it with a hook, form a double loop.

Hooking it with a hook, carefully remove the bracelet from the machine.

If the resulting length is not enough, you can weave an extension cord. The method of its manufacture will become clear after watching the video lesson "How to weave a bracelet made from gum" Star "on the machine"

 

 

How to weave a bracelet from the triple gum on the machine

Another original bracelet, which can be made on the machine, is called “Triple”. It looks especially impressive when it is executed in the form of a rainbow, although the one-color version is also quite good.

1. We need a machine with stacks arranged in staggered order. To get the required bracelet size, you will have to combine two machines into one long one. Place the weaving device in such a way that the cuts are directed in the opposite direction to you.

2We put on one-color elastic bands on the first two columns of each row as shown in the photo.

3. In the same way we connect the following pairs of pegs, but already choosing a different color of rubber bands. A rainbow is obtained when you can pick up rubber bands of red, orange, yellow, green, blue, blue and purple colors.

4. In the described way we put gum on all the columns on the machine, not forgetting to alternate colors.

5. Turn the machine by cutting the columns towards you and proceed to the formation of the rigid base of the bracelet. You can do this with the help of black or white rubber bands, putting them on the bars that form triangles (we designated them with numbers 1, 2, 3). Extreme pegs are not involved in this process.

6. Begin weaving. Hook hook up the bottom loop on the rightmost column and throw it on the next column in this row.

In the same way we connect all the right columns on the machine. We act in a similar way with the loops of the middle and left rows. As a result, the machine produces a pattern resembling raindrops.

7. Fasten the bracelet. To do this, all the loops of the last pegs of the right and left rows are transferred by hook to the outermost column of the middle row.

Next you will need another gum.Using a hook, you need to pass it through a column, on which all the loops are worn, and tie it.

8. Holding the gum with your fingers, carefully remove the bracelet.

9. After that, it remains to wear a clasp on the bracelet and wear it at your pleasure.

As you can see, weaving a triple bracelet on a machine is easy. If someone has any questions, the answers to them can be found in this video tutorial:

 

 

How to weave a bracelet made of gum "Angel Heart" on the machine

To weave a bracelet of rubber bands on the machine, you should have on hand 75 rubber bands of two colors, for example, 25 lettuce and 50 orange. The pattern of weaving is not particularly complex, and therefore even beginners can just begin to learn the basics of weaving.

 

1. Prepare the machine by removing one of the rows (you will need only two of them) and turning it in sections of the columns towards you.

2. A gum of lettuce-colored color twisted by a figure eight is placed on the two nearest columns.

3. Orange gum is put on the same pegs in the usual way.

4. Hook a salad gum on the left post and drop it off the peg, leaving it hanging on the orange loop between the posts.

five.Holding the orange loop on the left peg with your finger, remove the orange gum from the right column with a hook and throw it on the left. It forms a double red eyelet.

6. Take another gum of this color and put it on top of both columns.

7. We hook the salad gum on the right peg and hook it to the center.

8. Returning to the left peg: remove the top orange loop from it and transfer it to the right column.

What happened? Double orange loops are thrown on the posts, and between them is a twisted figure-eight green elastic band.

9. Salad gum is put on two columns, as was done in paragraph 6.

10. Grasp the middle loops on both pegs and hook them to the center. Naturally, this should be done alternately.

11. Fold the gum down and put the orange rubber on both pegs again.

12. From this moment comes the turn of action, which will be cyclically repeated. On the left column, pick up the bottom orange loop and drop it to the middle. The upper loop is transferred from the right column to the left.

13. On both pegs the gum of orange color is again thrown, and the actions are repeated,described in paragraphs 12, 13, but only in mirror image. As a result, we get 1 green and 2 orange loops on each column in the upward direction.

14. We take a new salad gum, throwing it on top.

Remove the top orange loop from the left peg, dropping it into the middle.

Then do the same with the bottom green loop.

Repeat the same steps with the top orange and lower salad loops of the right column.

15. The manipulations described in paragraphs 11 - 14 should be repeated several times (depending on how long the bracelet you want to receive). As a result, you will get this weaving:

16. We conclude weaving the bracelet on the machine: drop the upper loops to the center from both pegs.

We throw the green loop from one peg to the next.

17. To make it easier to put the buckle on, stretch the double green hinge into two pillars and hook the lock.

Master class "How to weave a bracelet made of gum" Angel Heart "on the machine":

 

 

How to weave a bracelet made of gum "Spiral" on the machine

To begin to weave a bracelet from rubber bands you need, having previously prepared the machine itself, three rubber bands of each color, rubber bands of the main color (we will have it black), a hook.

one.We put the machine in such a way that the cuts of the columns were directed in the opposite direction to you - it will be easier to weave. We will use only two rows: central and right.

2. Create the basis of the product, connecting the pegs of the right row with rubber bands of the main color in pairs.

3. The second row "dress" in the gum in the same way. The last rubber on the far edge of the machine, closing the perimeter, will be used to secure the base.

4. Double loop, made of new gum primary color, throws on the most extreme corner peg. And back to the beginning of the machine.

5. We put three colored elastic bands on the second column of the left row.

We hook them up by turning them through 360 ° (the direction does not matter), we twist the elastic bands and put them on the next column from the other row.

6. We perform similar manipulations with the remaining columns and elastic bands. The last two pegs with black rubber bands are left intact.

7. Expand the machine, directing the cuts of the columns towards you. At the extreme corner peg, hook the second loop to the bottom and transfer it to the next peg from the second row.

eight.On each of the posts we find a black loop, hook it with a hook and throw it on the nearby peg.

9. Perform the same actions with the second row rubber bands.

10. Another black gum is passed through with a hook through the outermost column, we make a double loop, put it on the hook handle and remove the bracelet from the machine.

Bracelet, made on the machine, get short. You can learn how to lengthen it from the video lesson “How to weave a Spiral bracelet on a machine”:

 

 

Now many have begun to weave bracelets made of rubber bands, but do not forget that bead jewelery looks no less attractive. Maybe you should try to combine them?


Take it to yourself, tell your friends!
Read also on our website:
The skirt year - an element of femininity and attractiveness of all time
Among the great variety of skirts there are classics that are not out of fashion, and the current one today is skirt year.
DIY leather bracelets are simple and beautiful!
Leather bracelets are very beautiful and comfortable due to the natural material. And making leather bracelets with your own hands is much easier than it seems at first glance.Try it once to make sure it is original!
Weaving wide bracelets of rubber bands on the machine - master class
Do you think weaving wide rubber bands on a machine is a difficult and lengthy process? We are ready to convince you by giving a few master classes in the creation of these jewelry. To make it clearer, we will accompany our detailed descriptions with photo illustrations.
Figures of rubber: a master class
How to weave a figure out of ordinary rubber bands, which will decorate a bracelet on your hand or will become a replacement for a annoying keyring? We will tell and show step by step the process of weaving stylish accessories that will highlight your individuality.
show more
Bracelets of gum for beginners. Which tool to choose?
Bracelets made of gum - a real hit of the season! How to weave beautiful multi-colored ornaments with your hands? What is needed for this? Which weaving techniques are better for beginners? Answers to all questions, photo lessons and videos of master classes can be found on our website.
Four ways to weave bracelets from gum
How to weave bracelets of gum - from the most simple to fairly complex? We offer video clips of master classes and detailed step-by-step instructions with photo illustrations that will help you create a miracle costume jewelry out of ordinary rubber bands.
Weaving: history, types of weaving
There are a huge number of methods, techniques and materials used in this kind of needlework. The most popular today is wickerwork, beading and macrame.
Sofia
2017-07-29 20:06:57
Well, not what I expected
Reply
Answer
hide
Ulyana
2016-04-03 16:56:45
Very cool
Reply
Answer
hide
Andrew
2016-03-30 18:34:28
super
Reply
Answer
hide
Dasha
2016-02-07 13:32:28
Norm website.
Reply
Answer
hide
Ruslan
2016-01-30 06:04:43
Reply
Answer
hide
zoe
2016-01-25 17:21:48
I was not able to weave all the bracelets but not a bad site a lot of interesting and beautiful bracelets
Reply
Answer
hide
Anastasia
2018-01-01 13:54:43
The application of norms but I can not spam all the bracelets
Reply
Answer
hide
Marina
2016-01-25 13:02:38
I love to weave and still lash! I already have a very large collection of bracelets and various figures !!!
Reply
Answer
hide
Nastya
2016-01-24 15:53:54
Clas I started to weave new patterns
Reply
Answer
hide
Arina
2016-01-04 17:21:37
where the bracelet is an asterisk on the 8th picture I didn’t understand but it’s cool !!!!!!!!!!!!
Reply
Answer
hide
Arina
2015-12-20 18:34:21
the class! and all the padronos show.
Reply
Answer
hide
Sasha
2015-12-20 11:10:35
slightly but cool anyway
Reply
Answer
hide
Liza
2015-12-05 16:16:56
I may be the first races on the site but I like him
Reply
Answer
hide
ira
2015-12-04 13:13:49
cool and even too :)
Reply
Answer
hide
Yana
2015-11-29 19:43:50
cool
Reply
Answer
hide
PAULINE
2015-11-16 19:56:56
cool
Reply
Answer
hide
Dasha
2015-11-08 12:46:25
Reply
Answer
hide
Raman
2015-11-07 18:20:10
don't understand
Reply
Answer
hide
Nastya
2015-11-07 11:45:13
It’s just that you don’t know how to weave and you don’t have anything to do and it’s not working;
Reply
Answer
hide
Anton
2015-11-06 18:07:43
Reply
Answer
hide
Nastyaduzh
2015-10-24 14:10:37
duzhno garno
Reply
Answer
hide
angelina
2015-10-16 15:10:00
normal show. One word crap and all.
Reply
Answer
hide
Nadia
2015-10-06 06:29:21
what is this bullshit
Reply
Answer
hide
amine
2015-10-05 19:10:00
bite
Reply
Answer
hide
Masha
2015-10-04 16:23:13
no idea is not understood but ha ha ha
Reply
Answer
hide
light light
2015-10-03 13:03:16
hu hu hu hu didn't understand
Reply
Answer
hide
Milana
2015-09-26 17:00:28
nothing not clear garbage êàî
Reply
Answer
hide
Lera
2015-09-23 18:20:07
Not chevo not understood but !!!
Reply
Answer
hide
Lera
2015-09-17 15:39:27
very cool and beautiful
Reply
Answer
hide
Sasha
2015-09-14 19:40:57
class !!!!!
Reply
Answer
hide
Arina,
2015-09-14 14:03:37
I do not understand.

Related news

  • How to eat for intestinal health
  • The sin of smoking is the scourge of humanity
  • How to arrange and arrange the front door by Feng Shui
  • How to make a beautiful case for your mobile phone
  • Incorrigible French SS man
  • Weave bracelets of gum on the machine

    Weave bracelets of gum on the machine

    Weave bracelets of gum on the machine

    Weave bracelets of gum on the machine

    Weave bracelets of gum on the machine

    Weave bracelets of gum on the machine

    Weave bracelets of gum on the machine

    Weave bracelets of gum on the machine

    Weave bracelets of gum on the machine

    Weave bracelets of gum on the machine

    Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine Weave bracelets of gum on the machine