Step-by-step instructions for creating a dog from a balloon

Step-by-step instructions for creating a dog from a balloon

Technique twisting ball sausages

Girl holding a ballBefore you break the disclosure of the main topic, you must complete a short course in the technique of twisting.

Never fully inflate the ball. This cannot be done for one simple reason: so that your rubber sausage does not burst in the creative process. After all, the air you squeeze out there will accumulate. The length of this tail should be approximately from 9 to 12 centimeters.

When you finish inflating the ball, firmly squeeze his neck with your fingers and tie it on the knot.

As a rule, all toys from balls are made by simply twisting different lengths of bubbles with their subsequent fixation in the style of “lock”.

Simple twisting technique

  1. Determine the size of the bubble.The girl twists the ball
  2. At the required distance from the knot, squeeze the ball.
  3. Holding the short end of it with the right hand in the twisting point, turn the long part of the ball around its axis no more than four times with your left hand.
  4. All further twisting produce in the same way and in the same direction.

Technique twisting "lock"

Ball in the form of a dog's headThis technique is used in cases when it is necessary to fix three successively located bubbles in a certain shape. To this end, fold the last two bubbles together, bending them at the connection point. Then, twist the bubbles and turn around your own axis from 3 to 4 times, connecting with the previous one.

Experienced twisters, working with a “lock” type connection, use a slightly different technology: twist the two bubbles, at the point of the last twisting the ball is bent. Next, squeezing the work area, measure another bubble, and then produce a twist.

Technique twist "with kink"

The girl makes the dog from the ballTwisters use this technique in the case when it is necessary to fix three consecutive bubbles in a certain shape, but considering that the two most recent bubbles are not twisted, but are simply bent together.

  1. Using ordinary twisting, create a bubble of the required length.
  2. Bend the ball at the distance required from the first twisting point.
  3. Crush it at the level you need at the junction of the first bubble with the second, and twist it 2-3 times.
Those bubbles that are not fixed on the technique of "lock", hold with your hands so that they could not unwind.
You must first set yourself up for defeat, because from the first time, nothing and no one has succeeded. Nevertheless, the skill, patience and desire to achieve the result you require - they will make their own, and you will learn how to make all the necessary figures.

Technology to create a sausage ball dog

Twist the first bubbleIn order to make a dog out of a ball, you will need knowledge of the technology that was presented above, as well as dexterity and flexibility of fingers. We will accompany the entire process with a detailed description of each step, providing photos and videos for a better understanding of what is happening. Using this instruction, you can easily make a beautiful air poodle.

Twist the second bubbleInflate the ball, while not forgetting to leave a small tail of 9 centimeters.

To do our little dog, we begin, as expected, with the head. To this end, you will need to make the first vial, which will serve as a muzzle, from seven to ten centimeters long.

Now we will put the first eyelet on the face. To do this, you need to make another air bubble with a length of five centimeters.

Twisting on the "lock" technologyAfter the first abalone, we create the second ear by twisting another identical bubble.In the place of the last twisting with your thumb and forefinger, squeeze the work area in such a way that the necessary bubble length of five centimeters is measured. In the same place, all the bubbles are twisted, and the connection of the muzzle with the ears is performed according to the “lock” technology.

Twisting the neck ballThe next step is to create a bubble with a length of 6 to 7 centimeters, which will serve the little dog with its neck. After the neck, for our air poodle, you will need to make a torso. Regarding the length of the bubble, you can fully rely on your taste.

After you manage to do all the above steps, proceed to the legs of the dog, which are also made from the ball. Swift dog will require long legs,Making the legs of the balland an ordinary dog ​​will be satisfied with bubble pads six or seven centimeters long. Especially well shown how to do this on video. The length of the front foot should not exceed seven centimeters.

Before you make a doggie's body and bring the dog out of a sausage ball to its natural original,Connect two legsIt is necessary to connect the two legs together. To do this, you will need to bend it in the place of the last twisting.After that, with two fingers, thumb and forefinger, squeeze the work area and twist both balls-limbs together using the “lock” technology.

This step will be final. Hind legs need to do the same way as the front, also using the technology of "lock".Making the torso doggieComplete the whole process, as shown in the video, a small tail. Its variations can be a huge amount. Everything will depend on the artist. Actually, it may be the same as in the red poodle.

We are sincerely sure that you managed to make a dog out of a ball, and she really liked it, to those who were presented as a keepsake.

Related news

  • Gorodnya: a selection of sites
  • Decoupage types, techniques, styles and decorative effects
  • Conductors also know how to swear
  • Crocodiles of the ancient seas
  • Lost
  • Step-by-step instructions for creating a dog from a balloon

    Step-by-step instructions for creating a dog from a balloon

    Step-by-step instructions for creating a dog from a balloon

    Step-by-step instructions for creating a dog from a balloon

    Step-by-step instructions for creating a dog from a balloon

    Step-by-step instructions for creating a dog from a balloon

    Step-by-step instructions for creating a dog from a balloon

    Step-by-step instructions for creating a dog from a balloon

    Step-by-step instructions for creating a dog from a balloon

    Step-by-step instructions for creating a dog from a balloon

    Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon Step-by-step instructions for creating a dog from a balloon