How to make a spoon from a spoon? Practical recommendations
In the house of every fisherman there is a whole massitems that are suitable for self-made gear. In the presented material I would like to talk about how to make a spoon from a spoon. The search for the answer to this question will be dealt with next.
What are the advantages of self-made lures?
As practice shows, do it with your own handsspoon with the use of as the basis of an ordinary tablespoon of the strength of each angler. To this are added a small cash outlay, which will go only to buy small components to create gear.
How to make a spinner-wobbly from a spoon? In the process of studying this issue, the master opens wide scope for all sorts of experiments, the realization of original ideas and the manifestation of fantasy. Thus, you can create an unlimited number of gears, each of which will differ in its own characteristics.
How to make a lure on a pike from a spoon? This will require the following:
- actually the spoon itself, made of stainless, fairly thin material;
- thin wire;
- clockwork rings;
- triple hook;
- a few swivels.
Choosing the basis
How to make a spoon from a spoon? Before proceeding to concrete actions, it is necessary to choose a suitable object, which will act as the basis of tackle. The best option is to use a small dessert spoon. The dining room may be too heavy and heavy, so it will be good to hunt exclusively for large predatory fish.
The choice of a tea spoon will allow using a tackle on the least powerful spinning. Its small size will make it possible to catch fish of relatively small size: perch, chub, asp.
As for the nature of the metal from whichmade a spoon, here you can give preference to any alloy, starting with stainless steel and ending with silver. To process the material, you may need a file, a metal hacksaw, pliers, a hand or an electric drill.
How to make a spoon from a spoon with my own hands?
First, it is necessary to separate the handle of the spoon from itsround part. To do this, use the file, specifying the place where the cut will be performed. It is desirable to separate the stem of the product with some allowance. This will leave enough room for breakdown holes for the winding rings.
Separating the handle from the spoon is convenient with a hacksawfor metal. Having coped with the task, all defects and roughness must be aligned with the help of the same file. The remaining stalk is not recommended for disposal. If desired, you can also make a fairly good long-range spoon from it. However, we'll talk about this later.
Next, you need to make holes at the edgesround part of the workpiece with a drill. To do this, it is necessary to select a drill of this diameter so that the ring holes can freely enter into the formed holes. Before resorting to drilling, it is necessary to hold the spoon in the vice. If this is not possible, you need to find an assistant who will hold the workpiece with pliers. The burrs in the drilling locations can be removed with a file.
Then it is enough to take a few clockwork ringsand connect them to the workpiece. It is not recommended to use too small rings. Because they can interfere with the free oscillation of the gear in the water.
As a hook it is worth using a tee. Its size should correspond to the dimensions of self-made tackle. The hook must be connected to the swivel, which should be fixed in the hole on the workpiece by wire.
Spoon from a handle of a spoon
So we figured out how to make a spoon from a spoon, namely its rounded part. Now let's look at the features of making gear from the handle.
To improve the catchability of baitto bend the handle of the spoon at the ends. With the help of the same drill in them, you need to make holes for securing the line and hook. The hook is recommended to be installed on the wide part of the handle. In this situation, homemade spoon-baits will look more like a small fish.
Having figured out how to make a spoon from a spoon, it's worththink about how to equip its tee with additional bait. As the last one you can use a brilliant tinsel or a so-called vibrotail. A bright wool thread is also suitable for this.
On the surface of a self-made spoon-bait, you can mark the eye of a fish. In addition, it is worth painting one side or drawing cross strips here. All this will increase the number of bites.
The spinner is still one of theThe most effective gear for catching large predatory fish. As you can see, it's not so difficult to make with your own hands, taking as a basis a regular table spoon. This bait smoothly swayed in the water, reminding the predator of a small weakened fish, and causes him to instinctive desire to grab the prey.