How to iron a shirt: practical advice
Flawlessly seated clothing emphasizes status and a sense of style. Men need to take care of their appearance no less carefully than women. We'll tell you more about how to iron your shirt properly so that you can appear in it both at work and on a date.
At first glance, ironing a shirt is long and difficult. But it is not so if you know the secrets and tricks of this process.
What to consider?
So, the first rule is how to iron a shirt: the easiest way to do this is when the fabric is wet. After washing it must be straightened on the shoulders and allowed to dry, but not completely. If you did not have time to remove it in time, the fabric can be moistened in the following way.
Spray the product evenly with clean water from the sprayer, then fold the item and put it in the bag. So the fabric is moistened evenly.
It is important to remember how to iron a silk shirt: ideally dry. And it should be done through gauze or thin fabric in order to avoid damage to things.You can not spray water on shirts from the atlas: they may remain circles from water stains.
Rule two: the success of the event depends on seemingly obvious things. Nevertheless: get a high-quality, steady ironing board of a convenient height, ideally with a special ironing sleeve. Do not do without a reliable iron with stainless surface and temperature controller.
Water in the iron, it is desirable to fill the purified filter, and even better to buy distilled water in pharmacies. This will relieve the reservoir from the appearance of lime and salt deposits, as often happens when using tap water.
Rule three. Almost all shirts are stroked from the front. The exceptions are black things (they are shiny traces) or those that are decorated with embroidery.
How to iron a shirt: choose a temperature
Not only the result itself depends on the correctly set iron temperature, but also how much time and effort you spend on ironing. For this it is important to know the simple rules:
- cotton fabrics look at a temperature of 150 ºС, they should be generously moistened with water or steam;
- Flax can withstand temperatures around 210-230 ºС, steam and strong pressure on the iron will also come to the rescue;
- linen and cotton shirts are ironed at 180–200 ° C, sprinkling them with water or steam;
- viscose fabric requires a more delicate mode of 120 ºС. Such shirts can be moistened with water, but it is better not to use steam;
- some people generally prefer not to iron shirts, but nevertheless the iron gives the product tidiness. Use the low temperature of 110 ºС to tidy up the "header".
How to iron shirt: technique
In the process of ironing, the shirt does not stand in the already ironed places, the following sequence of actions is recommended: first iron the collar, then the sleeves and cuffs, then the bar, the shelf and the back. The main thing to start with smaller parts, and then go to areas larger.
Collarstroking from the inside out, you need to start the movement of the iron from the edges, gradually moving to the middle. Fold the collar can not be ironed, otherwise it is deformed and will not lie.
Cuffs- this is where to start stroking the sleeves. First, the cuff is stroked from the inside, then from the front. Before ironing, double cuffs should be unfolded, ironed from the back and front side, carefully folded and then smoothed over the fold.
Sleevesfirst you need to fold so that the seam was in the middle.It is carefully smoothed out, because the arrows on the sleeves are considered bad form. After that, fold the sleeve over the seam and gently iron. The ironing sleeve will greatly facilitate the task, if it is - just put the shirt sleeve on the base and move in a circle. The result will be canceled.
front part(shelf) is ironed both from the front and from the seamy side - it depends on the fabric. Pay special attention to the area between the buttons. The side with eyelets is usually ironed faster.
Back. It is also ironed, depending on the material of the shirt, from the front or the seamy side. It is best to lay the shirt side seam up and gradually move the fabric in a circle, moving towards the middle of the back and so on to the second edge.
Ironed shirts are kept on individual hangers in the closet. Allow the cloth to cool completely before sending them to the cupboard.
Knowing these simple rules, in a short time you will understand how to properly iron shirts - it is not at all difficult, and it will take no more than 10 minutes.